[Elecraft] Re: No Frames?

[Don Wilhelm]

Al,
Gee whiz, I didn't think about that!  I will add a note later.  I am =
also cc: to the reflector, since others may have the same thoughts - I =
hope you don't mind.

Yes, if you are running MS Internet Explorer, RIGHT-click on the frame =
section that you want to print and select 'print' from that list - it is =
known to work with IE 6 (I just tried it), procedure/results may vary =
with other browsers.

The other way is to escape from the frames (works with most anyone's =
frames) - right click on the page you are interested in, and look at =
"Properties" - that will show you the full address of the page - you can =
copy and paste that into your browser address line to go directly to the =
page in question (without frames).  I have linked the pages together so =
that if you start in www.qsl.net/w3fpr/dial_cal.html, it will then lead =
you to all the other pages, but not back to my main website index page =
(where the frames originate).

73,
Don W3FPR
  ----- Original Message -----=20


  Is it possible for me to print out your notes on the K2 Dial =
Calibration without the "Frames" on the left side of the page?

  Thanks,
  Al Dodds, W0KJV


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---