[Elecraft] K2 IF amp alignment
Eddy Avila
[email protected]
Wed Apr 23 09:20:00 2003
Hi Paul...I just went through this question with the guru's of Elecraft and
the reflector. Yes indeed, L34 is flat! The peak is subtle and broad but on
my K2 SN3345 it makes some difference. I ended up using the Spectrogram
software to "see" the peak....I really recommend spending the $25 for this
program...invaluable! As for not hearing the birdie at 7.000 you won't hear
it if an antenna is connected because the band noise masks the signal. Mine
is pretty strong so I'm guessing you probably do have a problem in the
receiver.
All my problems, by-the-way, were self-inflicted....and they were many!!! AS
suggested by Gary at Elecraft my most successful troubleshooting tack was to
start from the beginning and check every installed component. I found my
mistakes this way.
73...and good luck! ed
>From: "Paul Bartlett" <[email protected]>
>To: <[email protected]>, <[email protected]>,<[email protected]>,
><[email protected]>
>Subject: [Elecraft] K2 IF amp alignment
>Date: Wed, 23 Apr 2003 10:53:38 +0100
>
>Hi Gang,
>
>I'm up to page 61 in the manual (IF amplifier alignment). I could find no
>trace of the internally generated signal near 7000 kHz.
>
>I have the benefit of a rather nice Marconi sig-gen and stuffed 7.15000 MHz
>into the antenna socket. The manual suggests -100 dbm but I find the
>recovered signal disappears to the point of inaudibility at about -85dbm.
>
>The 40m bpf inductors peaked up nicely but tuning L34 was pretty flat.
>
>Does this seem right or should I investigate further?
>
>Best,
>
>Paul M3CRQ
>
>
>_______________________________________________
>Elecraft mailing list: [email protected]
>You must be a list member to post to the list.
>Postings must be plain text (no HTML or attachments).
>See: http://mailman.qth.net/mailman/listinfo/elecraft
>Elecraft Web Page: http://www.elecraft.com
_________________________________________________________________
Add photos to your e-mail with MSN 8. Get 2 months FREE*.
http://join.msn.com/?page=features/featuredemail