[Elecraft] Wiring the SM-8 to the K2

Mon Apr 21 08:33:00 2003

I use an SM-8 on my K2.  In fact, I use the A-B switch and two cables so I
can use my SM-8 on both the K2 and my Yaesu FT-847 (for 6 meters and
satelitte only).  I get excellent audio reports with the SM-8 and I did not
add any resistors because the SM-8 has a gain control on the bottom.  In
fact, it has two gains controls and a tone control.  It's a great mic.
Doug -- K0DXV

----- Original Message -----
From: "David Walker" <[email protected]>
To: <[email protected]>
Sent: Monday, April 21, 2003 5:31 AM
Subject: [Elecraft] Wiring the SM-8 to the K2

Has anybody wired the SM-8 mic to the K2?  I've wired mine and it seems to
be working but I'm sure about whether I needed to add the 5k resistor per
the KSB manual.

I'd appreciate any advice - to confirm I have done this correctly.

Cheers all,

Dave
VK2ICQ

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com