[Elecraft] K2 "Anomymous"

Rex Drake [email protected]
Fri Apr 18 10:43:01 2003


I agree.

You need to at the very least warm up your soldering iron and pass it
ceremoniously over the RF board.  HiHi.

73
ki5gh

K2# 3326


ps. Welcome to the fold

-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Friday, April 18, 2003 8:38 AM
To: [email protected]; [email protected]; [email protected]
Subject: RE: [Elecraft] K2 "Anomymous"


No you have to be able to smell the flux burning.


Gregg R. Lengling, W9DHI
Camel Communications, Inc.
Politics is the art of appearing candid and completely open, while
concealing as much as possible.   -States: The Bene Gesserit View
 


-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Ron Chambers
Sent: Friday, April 18, 2003 8:24 AM
To: [email protected]
Subject: Re: [Elecraft] K2 "Anomymous"

Ha!

Does it count that I took the top cover off and LOOKED inside
at the SOLDER joints?

Web Page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list. 
Postings must be plain text (no HTML or attachments). 
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com