[Elecraft] Fuzzy Audio

Thu Apr 17 05:01:01 2003

Hi David
Try to keep your compression as low as possible .Got the same problems as
you, so I cured  by :
1 /ajusting carefully the filter according to the number on the Xltl bag
2 / keeping compression down to 1 or 2, (and don't forget high compression ,
on any rig, isn't a solution ! )
73 to you and all the Elecrafters   Jacques
----- Original Message -----
From: "David Walker" <[email protected]>
To: <[email protected]>
Sent: Thursday, April 17, 2003 10:06 AM
Subject: [Elecraft] Fuzzy Audio

I was wondering if someone could give me some advise regarding KSB2 SSB poor
quality transmit.

I was talking to some bloke and the transmit took flight.  I noticed the
power meter waver when I wasn't talking and so I turned the power off.

When I turned the radio people reported I was distorted and breaking up.  I
turned the radio off and on again.... and no solution.
So I turned the radio off for 30 min's and tried again... no joy.  People
couldn't make out what i was saying.  So I did a reset (holding 456 while
turning the rig on.)  I reset my filters, PLL linearisation, and Compression
to 3 and set audio to 2.

People now tell me my audio is fine.  So... my question is... what would
have gone wrong with the rig?  I know it's a big question, but if anyone has
had a similar problem I'd like to hear from you.  This all sounds dodgy to
me.

Cheers all,

Dave.

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com