[Elecraft] Faster QSK on the K2

Thu Sep 26 20:45:00 2002

At 00:46 9/26/2002 -0400, [email protected] wrote:
>Hello All!
>        I know there have been some previous posts on faster QSK switching by
>putting
>a 1 meg ohm resistor across R17 on the Control board.  I have tried both a 1
>meg & presently a 1.5 meg ohm resistor and can still only go as low as tr 004
>without getting a clicking noise. If I set tr 003 a clicking is heard.
>Wonder if anyone had been able to get down to tr 001 without clicking on 2.01
>firmware??  Thanks.

I changed R17 to a 1 meg resistor. I have no clicks with tr set to 000. 
Reducing it to 470k produced clicks and I didn't have an 820k so I settled 
on 1 meg.

================================================
Dave Gingrich, K9DC - Indianapolis, Indiana  USA
K2 #2211, K1 #931, QRP-L #2376, ARS #1109,
FPQRP #389, IRLP 473/573,  k9dc.ampr.org
================================================