[Elecraft] Re: Elecraft Parts

[COLIN WHITMORE]

Outstanding... absolutely outstanding! You guys (and gals) are tops in my=
 book. Thanks, ever so much.

Cheers,
Colin
N=D8YGY =20
 =20
----- Original Message -----
From: Scott King
Sent: Thursday, September 26, 2002 9:01 AM
To: 'COLIN WHITMORE'
Cc: gary@elecraft.com
Subject: Elecraft Parts
 =20
Hi Colin,
 =20
Today I'm sending you another 22 MHz xtal, no charge.  It's on the way.  =20
73,


Scott King  AH6KL =20
scott@elecraft.com =20
support@elecraft.com =20
parts@elecraft.com =20
www.elecraft.com =20
Telephone: 831 662-8345 =20
-----Original Message-----
From: COLIN WHITMORE [mailto:cncwhitmore@msn.com]
Sent: Wednesday, September 25, 2002 5:29 PM
To: parts@elecraft.com
Subject: K1 20M crystal


Gary,
 =20
I've built the RF probe in the manual to trace down a problem with my K1.=
 I did a receive trace and got to U7-7 and get a voltage reading from all=
 bands except 20M. This leads me to believe that I have fried the 20M cry=
stal.
 =20
I was showing off the K1 to a guest and there turned out to be a scattere=
d thunderstorm near my house. Well to make a long story short I, and the =
radio, got zapped. The K1 checked out fine shortly after the storm had pa=
ssed but a couple of days later the 20M band seemed dead on RX and TX. As=
 I mentioned above, I believe I have traced it to the crystal.
 =20
Anyway, could you please let me know how much a new crystal for 20M will =
cost? I'm feeling a little guilty every time I turn on the new K2, with t=
he handicapped K1 sitting nearby. I need get it back up and running, pron=
to.
 =20
Cheers,
Colin
N=D8YGY
 =20
PS - I promise to look outside before I hook up an antenna to either the =
K1 or the K2 next time. :-)


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---