FW: [Elecraft] Ground connector missing?

Tue Sep 17 18:31:01 2002

The ground lug hardware comes with the KAT2. If you don't plan the tuner,
plan on Ace, or some such.

Dan / WG4S / K2 #2456

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Ron D'Eau Claire
Sent: Tuesday, September 17, 2002 6:17 PM
To: [email protected]
Subject: RE: [Elecraft] Ground connector missing?

Not in my K2 kit. I used a common machine screw, lock washer and nut to
mount in the hole on the back with the threaded end sticking out the
back,  then added two flat washers and a wing nut for ease in connecting
a ground wire to the case. They are standard hardware bits that should
be available at any hardware store.

Ron AC7AC
K2 #1289

================
Hi,

I was going to connect my K2 to my safety ground, but my K2's back is
missing the ground connector.  Is it part of the kit (meaning: did I
loose it)?  Also, where can I get one? Andreas, KU7T

_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com