[Elecraft] Fast Play, Please Go Away

[Eric Manning]

I couldnt make FP Go Away so I changed both FP1 and FP2 to other 
things [LCD & bargraph]  but   fast play kept right on flashing away 
...


I finally had to re-assign FP1 to Fast Play, then hold button FP1 to 
make the display read FP OFF. Like dave says below.
Ten-year olds have no trouble with this stuff, I'm sure. Too bad I 
haven't been 10 for 50 years =)



Josh:
   The c to F indicates you have "fast play" enacted.  That means you have
either PF1 or PF2 set to toggle fast play.  Try pushing PF1.  If it says
FPoff, then you're problem is solved.  Pushing it again will produce FPon,
etc.  If PF1 doesn't do this, then PF2 must.

best wishes,

dave belsley, w1euy

--On Saturday, August 31, 2002 8:38 AM -0700 xppq <xppq@pyramid.net> wrote:

>  I went to change filter setting
>  but forgot the freq counter cable not
>  conected - got  INFO 230
>  warning.
>
>  Now Mode indicator " c"  is flashing
>  "F"  - alternates between " c" and " F"
>  -
>  What is procedure to STOP the flashing
>  "F"  -  thanks guys
>
>  Josh N7XM
>
-- 
Eric Manning   VA7DZ VE3DPV
K2 #2561 "Pauline"