[Elecraft] KPA100 and KAT100 in EC2, instructions, order to build...

Tue Oct 29 14:34:02 2002

Hi

Elecraft cannot directly support or provide the information on the remote=
 mounting because of FCC rules on the sale of external amplifiers. Even t=
hough the KPA100 will not work without the K2 it is best if they do not r=
aise any flags. However you can do it yourself and it's easy. Build your =
KAT100-2 and install it into the EC-2. Remove the KPA100 from the K2 and =
install the standard top (add the KIO2 if you don't already have one) The=
n plug in the RF and AUX 12 volt cable from the KPA100 into the connector=
s provided in the KAT100-2 and put in all the screws. That's all there is=
 to it. You will need a BNC to BNC cable about 2 or 3 feet long, a short =
PL239 jumper cable and the 9 pin male to 9 pin male KIO2 to KPA100 interf=
ace cable to connect up everything. You will also need to power the K2 an=
d the KPA100/KAT100-2. They can be powered from the same power supply wit=
h 2 power cables connected to the power supply or you can make up a 'Y' c=
able with a small gauge wire out of the PowerPole connector to the K2' ro=
und power jack.

Don Brown
KD5NDB

----- Original Message -----
From: Andreas Hofmann
Sent: Tuesday, October 29, 2002 11:16 AM
To: [email protected]
Subject: [Elecraft] KPA100 and KAT100 in EC2, instructions, order to buil=
d...

Hi,

I like the idea of having the PA and the AT in the EC2 enclosure. Is
there a manual/info out there that explains how to do it (the KPA100
docs don't mention it)?

Also, what should be built first? I would like to have the PA first
since the KAT is not urgently needed...

Thanks and 73,

Andreas, KU7T

K2 #2555

--- StripMime Report -- processed MIME parts ---
multipart/mixed
  multipart/alternative
    text/plain (text body -- kept)
    text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list. =20
Postings must be plain text (no HTML or attachments). =20
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---