[Elecraft] Accessing Spectrogram 7.0

Wed Oct 23 10:08:00 2002

That sounds like the self installing .exe version wasn't 'compiled'
correctly. You see that exact problem often with the initial release of a
self-extracting program which is why I normally just opt for the simpler
zipped version.

You might want to try downloading it again just in case the file transfer
itself was corrupted somehow (although these days that's unlikely). Also, if
there was a problem the author may already know and has fixed it already. If
it still fails you might want to let the author know.

In the interim there is always the .zip file.

Mike - AD5IU

----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Wednesday, October 23, 2002 7:07 AM
Subject: [Elecraft] Accessing Spectrogram 7.0

> I would appreciate any help on accessing the newly downloaded Spectrogram.
I
> have downloaded it to my C drive.  When I go there and click on
Spectrogram
> (revised), I get Install Shield Self-Extracting.EXE and the note This will
> install Spectrogram.  Do you wish to continue?  After pushing the Yes
button
> I get This file is not the correct size or is corrupt, and is unusable.
Can
> anybody tell me what to do to get this new Spectrogram program to work?
> Thanks    Roy Morris  W4WFB  K2/100 #2225
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com