[Elecraft] tools 2

[David Schornak]

I have ordered a dummy load mike I would like to know about that mod for =
the ohr as that is the dummy load kit that I bought.

but my real problem is I have a simpson electric company analog volt ohm =
meter, when I hook it up it reads low on dc voltage for example if I =
hook it to a AA alkaline battery which my dmm reads at 1.605 volts the =
simpson reads 1 volt or if I hook it up to 2 AA alkaline batteries the =
dmm reads 3.21 volts the simpson reads 3 volts or maybe less I have =
zeroed the meter but does not seem to help and no matter what scale I =
use it reads lower than my dmm. the analog meter says it is a vacuum =
tube volt meter and is a simpson 312. any help guys or is it a time to =
get a new meter if so which analog meter is a good one to look at.?


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---