[Elecraft] TOOLS

[Don Brown]

I wasn't going to mention it but probably.

Don


----- Original Message -----
From: Bob Nielsen
Sent: Sunday, October 20, 2002 9:47 AM
To: Elecraft
Subject: Re: [Elecraft] TOOLS

Freudian?

73, =20
Bob, N7XY

On Sat, Oct 19, 2002 at 09:35:51PM -0700, Jim W7RY wrote:
> I think you need to double check your link and revise it!
> =20
> 73
> =20
> Jim W7RY
> =20
> ----- Original Message -----
> From: "Don Brown" <DolfinDon@msn.com>
> To: "David Schornak" <dschornak@attbi.com>; "Elecraft"
> <elecraft@mailman.qth.net>
> Sent: Saturday, October 19, 2002 3:34 PM
> Subject: Re: [Elecraft] TOOLS
> =20
> =20
> > HI
> >
> > A 50 ohm dummy load is required to complete the kit. You can make one=
 or
> buy one. OHR has a nice kit rated at 100 watts. Build it and you will b=
e
> ready for the KPA100 if you get that option. They also make a nice QRP
> wattmeter kit - the WM-2. I find I use the little wattmeter all the tim=
e. It
> has 3 ranges 10 watts 1 watt and .1 watt. I feel a good Digital Multime=
ter
> is a requirement to build the K2 although it could be built without it.=
 I
> like Fluke meters but some people think they are a little pricy for a h=
obby.
> However they are bulletproof electrically and mechanically and have a
> lifetime warranty so I guess you get what you pay for. The one on my be=
nch
> is almost 20 years old and still meets specs.
> >
> > You can get OHR kits from Morse Express www.moresex.com as well as a =
nice
> selection of Morse keys and paddles. The usual disclaimers, I have no
> relationship with Fluke, OHR or Morse Express other than a satisfied
> customer.
> >
> > Don Brown
> > KD5NDB
> >
> > ----- Original Message -----
> > From: David Schornak
> > Sent: Saturday, October 19, 2002 2:58 PM
> > To: Elecraft
> > Subject: [Elecraft] TOOLS
> >
> > okay been looking through the manual and was wondering beside the bas=
ic
> hand tools and soldering station is there any other test equipment or t=
ools
> that you need to complete the k2 or could use to do a good job on it.
> >
> > KG4LSK
> > David
> >


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---