[Elecraft] TOOLS and Morse Express

Sun Oct 20 08:41:01 2002

Hi

Sorry you are right the link should be http://morsex.com/ for the OHR kit=
s and Morse Express.

Don Brown

----- Original Message -----
From: Jim W7RY
Sent: Saturday, October 19, 2002 11:36 PM
To: Don Brown; Elecraft
Subject: Re: [Elecraft] TOOLS

I think you need to double check your link and revise it!

73

Jim W7RY

----- Original Message -----
From: "Don Brown" <[email protected]>
To: "David Schornak" <[email protected]>; "Elecraft"
<[email protected]>
Sent: Saturday, October 19, 2002 3:34 PM
Subject: Re: [Elecraft] TOOLS

> HI
>
> A 50 ohm dummy load is required to complete the kit. You can make one o=
r
buy one. OHR has a nice kit rated at 100 watts. Build it and you will be
ready for the KPA100 if you get that option. They also make a nice QRP
wattmeter kit - the WM-2. I find I use the little wattmeter all the time.=
 It
has 3 ranges 10 watts 1 watt and .1 watt. I feel a good Digital Multimete=
r
is a requirement to build the K2 although it could be built without it. I
like Fluke meters but some people think they are a little pricy for a hob=
by.
However they are bulletproof electrically and mechanically and have a
lifetime warranty so I guess you get what you pay for. The one on my benc=
h
is almost 20 years old and still meets specs.
>
> You can get OHR kits from Morse Express www.moresex.com as well as a ni=
ce
selection of Morse keys and paddles. The usual disclaimers, I have no
relationship with Fluke, OHR or Morse Express other than a satisfied
customer.
>
> Don Brown
> KD5NDB
>
> ----- Original Message -----
> From: David Schornak
> Sent: Saturday, October 19, 2002 2:58 PM
> To: Elecraft
> Subject: [Elecraft] TOOLS
>
> okay been looking through the manual and was wondering beside the basic
hand tools and soldering station is there any other test equipment or too=
ls
that you need to complete the k2 or could use to do a good job on it.
>
> KG4LSK
> David
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>
>
>

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---