[Elecraft] KAT100-2 pics added to web page

[Michael E Dobson]

On Wed, 16 Oct 2002 12:59:47 -0700 Eric Swartz WA6HHQ - Elecraft
<eric@elecraft.com> writes:
> We have added pictures of the KAT100-2 installed inside the EC2 to 
> our
> KAT100 page at:
> http://www.elecraft.com/kat100/kat100_page.htm
> 
> 73, Eric   WA6HHQ

Ok let's see.  The output of the KPA100 in the top of the EC-2 goes to
the RF in SO-239 and the output of the K2 goes to the Aux RF in BNC. 
Then the RF plug on the KPA100 plugs into the AUX RF jack on the KAT100
board inside the EC-2.  The AUX bus plug on the KPA100 goes to the AUX
Bus jack on the KAT100, the 12 V plug on the KPA100 goes to the 12V jack
on the KAT100. Finally the DB9 "Y" cable goes from the K2 to either input
on the back of the EC-2.

That about it?

73,
Mike WA3KYY K2/100 #2221

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.