[Elecraft] 15/20 Meters fixed

Mon Oct 14 19:01:03 2002

Don't have a 45 watt, yet...

Denis - KC6AUP

On Sun, 13 Oct 2002, ZOOM wrote:

> 60W soldering iron for soldering is too high!
> 45W watts at the most.
> 
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Denis Dimick
> Sent: Sunday, October 13, 2002 6:01 PM
> To: [email protected]
> Cc: [email protected]
> Subject: [Elecraft] 15/20 Meters fixed
> 
> After lots of e-mail from both the list and Gary, I'm please to state
> that 
> K1 s/n 1351 is now working and on the air.. Now to re-learn CW :)
> 
> It turned out that I had made a few solder joints that where bad. Never 
> did find a "bad" looking one, but when I built the RF board I used a 
> 25watt iron.. When I built the rest of the rig I was using a 60watt
> iron.
> 
> I have the NB and tuner working also.. My Dad is sitting on it now 
> listening to some guy of of OH and the other end is out of WA.. He says 
> it's 5/9 and this from a 75 foot long wire ant. only about 6 feet off
> the 
> ground, running North to South. 
> 
> I'm here in New Mexico,
> 
> 73's
> 
> Denis - KC6AUP
> 
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list. 
> Postings must be plain text (no HTML or attachments). 
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> 
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list. 
> Postings must be plain text (no HTML or attachments). 
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> 