[Elecraft] KAT100 and K2/100 questions

[Tom Hammond NØSS]

Hi Andreas:

>1. Can I still use the tilt stand on the combined K2/100+KAT100?

If you get the KAT100-1 (the small case version), you can use the 1.5" 
(38mm) tilt stand and place the K2/100 ON TOP of the KAT100. This will 
raise the controls of the K2 up to just about the same level they would be 
at if the K2 was alone and using its own tilt stand.

>2. I fell in love with 5W QRP.  Can I switch between 5W and 100W by the
>push of a button? Or is it between max. QRP power (12-15W) and max. QRO
>(100W)?  5W <--> 100W would be really sweet.

With the K2/100, power is adjusteble in 0.5W increments, all the way from 
0.0W through 100W (and possibly a bit higher).

If you wish to control QRP power levels 0.1W increments, you can either 
remove power from the KPA100 module (pull the cower cable), or you can 
disable it in MENU.

73,

Tom Hammond   N0SS