[Elecraft] KAT100-2 Rear panel with KPA100 etc.

[Don Brown]

Hi

What I would like is a blank KAT100-1 1.5 inch high box to put transverte=
rs into. I guess this would be the EC-1.5 :-)  Don't know if Elecraft wil=
l do it though.

Don Brown
KD5NDB

----- Original Message -----
From: Tony Fegan VE3QF
Sent: Sunday, October 13, 2002 5:36 PM
To: ELECRAFT LIST
Subject: [Elecraft] KAT100-2 Rear panel with KPA100 etc.

For those of us who wish to put some other accessory in the
upper half of the EC2, half height KAT100 rear panels and blank rear
panels would be useful. My metal shearing abilities are not the
greatest. I intend to put the KPA100 in the EC2 case but others have
talked about transverters and power supplies. =20
As many of your kits are exported, I believe that promoting
and/or selling "export only" kits, for the installation of the KPA100 in
the EC2 case, would not infringe on the FCC rules. The KPA100 is so
closely integrated with the K2, and without much modification cannot be
used without it, so I am not sure how the FCC views this. I do not
believe that any CBer in his right mind would even consider a KPA100
(needing major adaptation) when there are other, much less expensive,
alternatives for an illegal CB amplifier. =20

73

Tony Fegan  VE3QF

K2/100 # 490


_______________________________________________
Elecraft mailing list: Elecraft@mailman.qth.net
You must be a list member to post to the list. =20
Postings must be plain text (no HTML or attachments). =20
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---