FW: [Elecraft] Re: K2 user-interface quiz--stumped?

Tue Oct 8 13:07:01 2002

You didn't say to QSY only the Receive freq. REV will only move 1/2 of the
QSO. However, it will do that (if in SPLIT)! RIT and XIT won't go 5Kc. CW
Rev moves 1.2Kc max. LSB might get closer to 3.5, but I don't see it.

However, I count Direct Freq Entry and Memory Recall as two, and Band Up a
bunch is different than band down a little.

I grade him a 7 of 12. Wayne?

Dan / WG4S / K2 #2345

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Wayne Burdick
Sent: Tuesday, October 08, 2002 12:31 PM
To: [email protected]; Elecraft
Subject: [Elecraft] Re: K2 user-interface quiz--stumped?

Nice try, John. Unfortunately PF1 and PF2 can't cause a QSY by themselves
(unless mapped
to SCAN, but you mentioned SCAN separately), switching modes doesn't cause a
large QSY,
and your #9 is stretching the rules. So I'll give you 8 of 12  ;)

Wayne

[email protected] wrote:
>
> 1) Direct entry/memory recall
> 2) A/B switch
> 3) A=B (providing that B was 5Khz or more below A)
> 4) RIT/XIT switches - Does this count as two?
> 5) REV
> 6) Switch to LSB
> 7) Switch to CW mode and then use the CW RV switch?
> 8) switch to 15m with the Band- button
> 9) switch to 15m by pressing the Band+ button multiple times
> 10) PF1
> 11) PF2
> 12) SCAN
>
> How'd I do?
>
> 73 de John - KC4KGU
> K2/100 #2490
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com