[Elecraft] Re: Firmware upgrade

[Wayne Burdick]

Tom,

Whether installing the new firmware does an EEPROM initialization depends on how old your
firmware is. But just to be safe, write down your BFO and menu settings (including
settings in the CAL menu, i.e. S-HI, S-LO, and CUR). Then follow the instructions in the
Rev 2 Firmware Manual. If you didn't receive this with the kit, you can print it off the
web site.

73,
Wayne


Tom wrote:
> 
> Hi gang,
>   The mailman stopped by today with the KI02 interface.  This comes with the
> firmware upgrade which I intend to install before building the KI02 (I can
> do that, right?).
> 
> Is there anything I should be aware of, before removing the old firmware?
> For example should I be writing down settings, etc.?
> 
> Thanks in advance for your comments
> 
> Tom McCulloch
> WB2QDG
> K2 S/N 1103