[Elecraft] Winding Transformer T2 in K2

Thu Nov 14 23:15:01 2002

Hi

Wind it so the windings go in the same direction and the red and green wires
do not cross over

Don Brown
KD5NDB

----- Original Message -----
From: "Parker Buckley" <[email protected]>
To: <[email protected]>
Sent: Thursday, November 14, 2002 5:42 PM
Subject: [Elecraft] Winding Transformer T2 in K2

Looking at Fig 6-26 in the assembly manual, and based on the how the ends of
winding 3-4 depart the core, it looks like these turns run opposite in
direction to 1-2, which would result in the windings crossing at each turn.
The figure doesn't show the crossings.  Somehow, I bet this is important.
Thanks in advance for the help.

Parker WD8JOL

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com