[Elecraft] KAT100 LED assembly

Mon Nov 11 14:44:00 2002

Hi

The manual is correct they need to be all the way down on the board. You may
need to push a little to get past the little nub on the lead.

Don Brown

----- Original Message -----
From: "Vic Rosenthal" <[email protected]>
To: "Elecraft" <[email protected]>
Sent: Monday, November 11, 2002 1:20 PM
Subject: [Elecraft] KAT100 LED assembly

> The KAT100 manual says the front-panel LEDs must be flat against the
board.  The
> leads of the LEDs have little crimps that stop them from being inserted
all the
> way.  Is the manual correct and I should force them in all the way (or
file the
> crimps), or should I just go as far as the crimp?
>
> I think they need to go in all the way, but I just want to be sure.
>
> Vic K2VCO
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>