[Elecraft] K2-PSKing

Sun Nov 10 11:34:03 2002

I am using a Kenwood compatible mike plug and then just run the headphone
jack to the audio out with a regular stereo plug. Then just using a straight
audio to audio for the headphone jack on the K2 to the mike input on the PC.
The other thing that I did was use the RS 1:1 audio transformers in both
lines. This cable has worked great for me for SSTV, RTTY and PSK. I do not
have a transmit to serial or parallel connection to the PC. The VOX on the
K2 works just great for me on PSK. I do have a manual transmit switch on the
mike plug if needed.

Jess
----- Original Message -----
From: "Tom" <[email protected]>
To: <[email protected]>
Sent: Sunday, November 10, 2002 9:01 AM
Subject: [Elecraft] K2-PSKing

> Hi gang,
>
> I'm about to begin the SSB mod on my K2 and was wondering what most guys
are
> doing as far running the audio to their computer sound card.  I'd prefer
NOT
> to listen to the K2 through the computer's speakers if at all possible.
>
> This  seems like a pretty straight-forward mod but I'd thought I'd ask
> around before fouling things up on my own--hi.
>
> Thanks in advance for your suggestions
> Tom McCulloch
> WB2QDG
> K2 s/n 1103
>
>
> Friend of Bill W.
>    ---  If you are too, drop me a line.
> -----Original Message-----
> From: Jess Gypin <[email protected]>
> To: [email protected] <[email protected]>
> Date: Sunday, November 10, 2002 10:55 AM
> Subject: [Elecraft] (no subject)
>
>
> >What is the favorite for running PSK these days? I am using Mix32 right
> now,
> >but wonder what you all like the best.
> >
> >What about some of the other modes out there?
> >
> >Jess
> >
> >
> >
> >_______________________________________________
> >Elecraft mailing list: [email protected]
> >You must be a list member to post to the list.
> >Postings must be plain text (no HTML or attachments).
> >See: http://mailman.qth.net/mailman/listinfo/elecraft
> >Elecraft Web Page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com