[Elecraft] K2 BFO & PLL Mods - Revised DOCs available

Sat Nov 9 20:07:00 2002

Tom:
  Thanks for the new instructions.  Note that L33 on page 1, right-hand=20
column, last sentence of paragraph 3 should be L31.

  Also, how often are the anomalies on page 4, requiring alterations to=20
L33, encountered?

best wishes,

dave belsley, w1euy

--On Saturday, November 9, 2002 2:46 PM -0600 Tom Hammond N=D8SS=20
<[email protected]> wrote:

> Folks:
>
> For those of you who will soon (if not already) receive your kit of parts
> for the K2 BFO & PLL mods, please note that there were two steps (the
> installation of R19 and then the soldering of R116) missing from the
> printed documentation which were mailed with the mod kit.
>
> There is an UPDATED set of installation docs available at:
>
>     http://www.qsl.net/n0ss/
>
> Normally these would have been posted by Eric to the Elecraft website
> (and they eventually will be), but it appears that Eric's out of the
> office today and can't post the update until probably Monday (Nov 11th).
>
> Since I am to blame for these errors (I compiled the instructions and
> drew some of the illustrations), I felt it necessary to mitigate the
> questions as soon as possible. So, to get the revised docs out to you as
> soon as possible (and this HAS been approved by Wayne), I've placed them
> on my web site at the link shown above.
>
> Note that there is NOTHING which would have been damaged by the missing
> steps. It's just that things weren't quite 'complete'.
>
> Sorry for any problems this might cause anyone.
>
> 73,
>
> Tom Hammond   N0SS
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list. Postings must be plain
> text (no HTML or attachments). See:
> http://mailman.qth.net/mailman/listinfo/elecraft Elecraft Web Page:
> http://www.elecraft.com

----------------------------------
David A. Belsley
Professor of Economics