[Elecraft] bfo test page 59

Sat Nov 9 11:33:01 2002

Hi

There is a procedure in the manual on page 98 (the page number may be
different in the rev B manual) that allows you to calibrate the 4.000 MHz
clock to WWV without any external equipment except an antenna. It is under
the heading Using a Calibrated Signal Source

Don Brown
KD5NDB

----- Original Message -----
From: "David Schornak" <[email protected]>
To: "David Schornak" <[email protected]>; "Elecraft"
<[email protected]>
Sent: Saturday, November 09, 2002 9:55 AM
Subject: Re: [Elecraft] bfo test page 59

>
> rev b boards
>
>
>
> bfo test
> initial reading 4916
> hi 4916.92
> low 4913.48
> difference it 3.44
>
> no my 4 mz oscillator calibration has not been set as I don't have anther
> receiver handy or a frequency counter that is handy I have checked all the
> components in the bfo but to no avail my difference still is not >=3.6
what
> can I do?
> or what should I do.
>
>
> see ya
>
> 73's
> KG4LSK
> David Schornak
>
> K2 03027
>
> arf arf arf
> don't forget me
> Mis Ginger
>
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>