[Elecraft] PA transistors

[Kevin Cozens]

At 11:31 AM 11/06/2002 -0800, you wrote:
>I have four 2SC2879 transistors, such as are used in the KPA100 PA.  When I
>measure the forward voltage drop of the emitter-base jucnctions I get:

Only transistor number 1 sounds good but I would always check both 
junctions of the transistor in both directions to make certain it is good. 
In the wrong direction you should see no continuity between the B-E and B-C 
junctions and typically .6 or .7 volt drop in the other direction for the 
two junctions.


Cheers!

Kevin.  (http://www.interlog.com/~kcozens/)

Owner of Elecraft K2 #2172        |"What are we going to do today, Borg?"
E-mail:kcozens at interlog dot com|"Same thing we always do, Pinkutus:
Packet:ve3syb@ve3yra.#con.on.ca.na|  Try to assimilate the world!"
#include <disclaimer/favourite>   |              -Pinkutus & the Borg