[Elecraft] re osc problem on kpa100

[Kurt Cramer]

Bob,

I got around to looking into the pa osc problem on 17 meters. RFC10 had
very short leads, so I just tried a ground connection from the pa shield
to one of the screws holding the SO-239. It worked! I used a long solder
lug that I had in the junk box. I put it under the nut at the SO-239 and
it also fit under the screw head of the corner stand-off of the pa
shield. No more than 3/4" long.  Thanks for the info and the pictures.
That gave me the confidence to try something.

73, Kurt
W7QHD (since 1951)
web page: http://W7QHD.tripod.com