[Elecraft] J1 PIN 3

[Don Brown]

Oh I forgot to mention the resistance reading is OK

Don Brown
----- Original Message -----
From: Don Brown
Sent: Monday, November 04, 2002 2:08 PM
To: David Schornak; Elecraft
Subject: Re: [Elecraft] J1 PIN 3

Hi

Ahhh!! It appears You have one of the new Rev B Boards that has the audio=
 pot modification built in. You may be in for a few more pleasant surpris=
es.

Don Brown
KD5NDB

----- Original Message -----
From: David Schornak
Sent: Monday, November 04, 2002 2:00 PM
To: Don Brown; Elecraft
Subject: Re: [Elecraft] J1 PIN 3

k2 FP rev. B
2002 ELECRAFT



----- Original Message ----- =20
From: Don Brown =20
To: David Schornak ; Elecraft =20
Sent: Monday, November 04, 2002 2:41 PM
Subject: Re: [Elecraft] J1 PIN 3


Hi

What is the Revision letter on the front panel board?

Don Brown
KD5NDB

----- Original Message -----
From: David Schornak
Sent: Monday, November 04, 2002 1:37 PM
To: Elecraft
Subject: [Elecraft] J1 PIN 3

I have the front panel complete and I am doing the resistance check and e=
verything in the chart checks okay except for pin 3 which should be groun=
d in not it is coming up as infinity all the other pins on u1 and j1 read=
 according to the chart. I have been over the it with a magnifying glass =
and can't see what I have done wrong. help

kg4lsk
David
k2 03027

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---
_______________________________________________
Elecraft mailing list: Elecraft@mailman.qth.net
You must be a list member to post to the list. =20
Postings must be plain text (no HTML or attachments). =20
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---