[Elecraft] ATU power adjustment

[Jonathan Broscious]

Hi all,

I'm having trouble adjust my ATU for my K1. The problem is with the
power calibration. I have a probe and a 56 ohm dummy load. When I
initially have the potentiometers set to 60% of the rotation, I get
about 25 volts read on the DMM. When I get it down to 14, then I can't
turn the pots enough to make the readout on the K1 to say 5 watts. 

If you have any suggestions, please help me. I get the list, so you
could respond there, or you could e-mail me at jonathb@clearsail.net

Thank you all very much and 73,

Jonathan, KB3HVR