[Elecraft] K2 w/KSB CW reverse BFO

[Don Brown]

Hi

If the lid is only affecting the 4.000MHz oscillator you are correct. I d=
o the cal with the lid off and It does not seem to affect the VFO. Howeve=
r the bottom plate is another story. It must be in place with all of the =
screws in place or the VFO will shift when it is installed. It will also =
affect the calibration of the filters.

Don Brown
KD5NDB

----- Original Message -----
From: Vic Rosenthal
Sent: Thursday, October 31, 2002 9:32 PM
To: Don Brown
Cc: Elecraft
Subject: Re: [Elecraft] K2 w/KSB CW reverse BFO

Don Brown wrote:
> =20
> The only time it needs to be accurate is when CAL PLL is running.

This implies that I could do the whole process of setting the 4 MHz oscil=
lator
and doing CAL PLL and CAL FIL with the lid off.  =20

I've noticed that putting the lid on affects the frequency a bit, so I fi=
nd
myself struggling to adjust the oscillator so it will be right when I put=
 the
lid back on!  =20

Does anyone disagree with this?

Vic K2VCO


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---