[Elecraft] K1 #1160

[Don Wilhelm]

Ron,
Did you install C78 and RFC8 on the bottom of the K1 board?
These components are not present with the KFL1-4 kit, but are listed in the
parts list as being only for 80 meter operation with the 2 band board.
If that is not the problem - I too am stumped.
73,
Don Wilhelm  - Wake Forest, NC   W3FPR home page: http://www.qsl.net/w3fpr/
  QRP-L # 485   K2  SN 0020   mailto: w3fpr@arrl.net

*** Life is what happens when you're making other plans -- Mike Cross  ***

----- Original Message -----

> I am constructing the KFL1 for 80M and 15M bands and, on checking it out
> on receive, I can only get it to work on 15M. I have checked the
> components to ensure they are in the correct spots and have also
> verified that there do not appear to be and solder bridges. Any
> suggestions?
>
> By the way I built the KFL1-4 without any problems.
>