[Elecraft] Audio Monitor

Tue May 28 16:51:00 2002

In message <[email protected]>, [email protected] 
writes
>Trev, G3ZYY wrote:
>
>"Just one query, the first page of the documentation appears to indicate
>that it is possible to monitor my own audio by using the carrier balance
>mode.  I can't seem to find it referred to thereafter and, despite trying
>various combinations, I can't achieve it by trial and error."
>==========
>It's documented in the KSB2 manual on page 19 under "Course Carrier
>Balance Adjustment" and on page 21 under "Mic Gain".
>
>Select SSBA in the menu, then EDIT.  Then rotate the VFO knob until you
>see SSBA BAL, then exit the menu..
>
>Now you'll be able to monitor your mike audio (no signal is transmitted
>on the air in this mode).
>
>To exit the SSBA BAL mode, change menu item SSBA to  1, 2, or 3.

Tnx Earl but I have tried that already and still no joy.  I am using the 
Elecraft supplied MH2 Heil Mic with the jumpers set as described so I 
wouldn't have expected a problem.... everything else seems ok!

Trev G3ZYY
-- 
Trevor Day