[Elecraft] Audio Monitor

[Jim Younce]

Many microphones short out the mic element or remove voltage from the
elecret element when the PTT button  is released.  This might be your
problem
Jim Younce K4ZM
----- Original Message -----
From: "Ron D'Eau Claire" <rondec@easystreet.com>
To: <elecraft@mailman.qth.net>
Sent: Tuesday, May 28, 2002 14:02
Subject: Re: [Elecraft] Audio Monitor


> > It's documented in the KSB2 manual on page 19 under "Course Carrier
> > Balance Adjustment" and on page 21 under "Mic Gain".
> >
> > Select SSBA in the menu, then EDIT.  Then rotate the VFO knob until you
> > see SSBA BAL, then exit the menu..
> >
> > Now you'll be able to monitor your mike audio (no signal is transmitted
> > on the air in this mode).
> > 73, de Earl, K6SE
>
> Did you actually do this, Earl?
>
> It doesn't work on my K2. No audio in the headphones at any time.
>
> BTW, the first step of the "Coarse Carrier Balance Adjustment" says to
> "Disconnect the microphone" which, of course, I did NOT do when trying
this
> <G>.
>
> Ron AC7AC
> K2 # 1289
>
> _______________________________________________
> Elecraft mailing list: Elecraft@mailman.qth.net
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com