Fwd: [Elecraft] K2 Problems

[Tom Hammond NØSS]

Kevin:

>>There is a modification that addresses this issue.  Try
>>elevating T2 about 1/8" above the board.  I did this
>>when I built my K2 and I get at least 15W out on all
>>bands.
>
>You get 15W out on ALL bands?? What is your secret, Bob? I raised T2 above 
>the board by the thickness of some perf board material (approx. 1/16"). 
>This increased my power out on 10m from about 9.5w to about 10.5w.

Sometimes all it takes is careful alignment.

Try re-peaking (for max. output) on each band, using about 1W output.

73,

Tom Hammond   N0SS