[Elecraft] KPA100 Specs or Information

[Tom Hammond NØSS]

Hi Mario:

N0SS wrote:
> > I've only had custody of my KPA100 for about 8 hours since I completed
> > assembly... then had to send it to elecraft so they could beat on it a
> > while... it's still out there, but here's what I recall...
>
>Was this, per chance, enough time to think/test/play about the practical
>mechanical, and general feasibility of mounting the PA into an EC2, and
>also test the interactions of the automatic switching the PA on/off with
>the KAT2 installed ?

I'm afraid I had no such luck... to test the KPA10 in that mode. However, 
KPA100 in EC2 HAS been accomplished by at least one FT at this time, and 
the word I hear is that it worked well.

I'm sure you will hear (much) more on this in due time. There are several 
of us who are planning this method of installation... but AFTER the FTing 
(where Elecraft wants up to install the KPA in the manner THEY intended it 
to be installed) is completed.

73,

Tom  N0SS