[Elecraft] KPA100 Specs or Information

[John Grebenkemper, KI6WX]

Mario;
I am writing up a technical note on how to mount a KPA100 in the EC2.  This
note will be posted on my web site when it is ready (probably within the
next week) and I will send out an email to this list.  My eventual goal will
be to have both the KPA100 and the high power antenna tuner in a single EC2
enclosure.  Since I have a KAT2 in my K2, I will also make sure that it
works with the KAT2 installed.

This modification will not be supported by Elecraft due to the FCC rules on
high power amplifiers.

-John
 KI6WX


> Am 10. May 2002, um 22:52:33 schrieb Tom Hammond N�SS:
> > Lee, et al:
> >
> > >Ok, just am curious about the KPA100.  Maybe a few questions answered
here
> > >from the Field Testers....
> >
> > I've only had custody of my KPA100 for about 8 hours since I completed
> > assembly... then had to send it to elecraft so they could beat on it a
> > while... it's still out there, but here's what I recall...
>
> Was this, per chance, enough time to think/test/play about the practical
> mechanical, and general feasibility of mounting the PA into an EC2, and
> also test the interactions of the automatic switching the PA on/off with
> the KAT2 installed ?
>
> Mario
>
>