[Elecraft] 8R signal question

Thu May 9 16:19:02 2002

Yes, I do have the new firmware installed.  I forgot to look in that
manual for the darn commands that were added.  All is well.  It works just
fine.
My first CQ last night netted me New Zealand.

Mike AB6CV

On Wed, 8 May 2002, Ken Wagner wrote:

> You have to turn on the "8R Hold" in the menu. I think you cycle it on/off
> by  pressing the Display button when you are in the t-r delay edit mode.
> 73, Ken K3IU K2 #920
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> At 03:43 PM 5/8/02, you wrote:
> >I made the amplifier keying circuit.  But my amplifer is not full
> >break-in.  I need a delay.  The t-r setting is not doing it.  It looks
> >like the t-r setting is not affecting the 8R line.
> >Now what?
> >
> >Oh, if you use 2n3903 transistors for Q1 and Q2 the 10K resistor on the
> >base of the keying transistor is way too big.  1K works.
> >
> >Mike  AB6CV
> >
> >
> >_______________________________________________
> >Elecraft mailing list: [email protected]
> >You must be a list member to post to the list.
> >Postings must be plain text (no HTML or attachments).
> >See: http://mailman.qth.net/mailman/listinfo/elecraft
> >Elecraft Web Page: http://www.elecraft.com
>
>