[Elecraft] VFO Linearization

[Eric Swartz WA6HHQ - Elecraft]

CAL PLL is only run on 40M (which calibrates it for all bands) with the latest
firmware. Running it on other bands will cause this error.

73, Eric  WA6HHQ

Todd Sandahl wrote:
> 
> While going through the alignment and test part III I have come to the
> VFO linearization section and a failure. After starting the "CALL PLL"
> it runs for about two seconds and then displays "INFO 232"This occurs on
> all bands except for 40 meter, which done in part II and when run again
> now it still passes. I don't see any assembly errors, even under an
> assembly microscope. Has anyone encountered such a problem or have any
> insight as to what I might try next?
> Thanks in advance,
> Todd Sandahl
> KB1HIO
> 
> _______________________________________________
> Elecraft mailing list: Elecraft@mailman.qth.net
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com