[Elecraft] K1 Voltage readout

Sat Mar 16 09:58:00 2002

If there is a way to adjust it be sure to account for the voltage drop
across D16, the reverse voltage protecting diode.  It is probably somewhere
around 0.5 to 0.7 volts.  (Which makes me ask why do you need to adjust the
readout?)

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Tom
Sent: Saturday, March 16, 2002 8:38 AM
To: [email protected]
Subject: [Elecraft] K1 Voltage readout

Hello all,

Does anyone how to tweak the readout of the voltage on the K1?  I have
14.3V going into the K1 but the readout is saying 13.7V on the
display.  I just want to calibrate it as best as I can. (stickler for
details)
Thanks,

Tom Mihelich
73
K8TDM

_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com