[Elecraft] Alignment and Test, Part 1

[pgerba]

Hi Builders;

It seems I have a problem.  On start up of Alignment and Test, Part 1, the
K2 responded with "info 201" , but one of the relays was not latching and
was just "buzzing" so I turned the rig off. On restart, all relays latched
and are quiet, the display reads "ELE" the "craft" is missing. One bar of
the meter "the one under S9" is lghted..and that's all.  I didn't see the
40M freq.(7100.00c) etc.  No front panel buttons are active.. no smoke !

My guess is that the EEPROM was interrupted (by me) and may be missing data
?  Is there a restart for this? Or, do I have a more serious problem.  

I'll have a scope at home this evening.

Thanks All,

pete, kn6bi