[Elecraft] K2 On the Way -- Planning for Mods?
Tom Hammond NØSS
[email protected]
Thu Mar 7 14:06:04 2002
Hi Bill:
> From my reading, about the only mod that appears to relevant to the plain
>K2 are changes to the crystal case grounding and bypassing to reduce
>filter blow-by.
>
>Is there something I missed? What other modifications are recommended out
>there?
Definitely the xtal grounding mod!
Consider adding the CW Sidetone mod as well... it makes a fairly
significant improvement in what you're gonna hear for hours on end while
contesting.
As a preventive measure, e.g. easier to do now than later, add the AF GAIN
MOD.
When you build your K2, NOTE that T2 should be elevated avobe the PC board
about 1/8" in order to provide a bit more output on 10M/12M.
Finally, be sure to install the VFO "Walk" mod.
I can provide any/all of these mods in PDF format. If you can't find them
on the Elecraft site. Please check there first.
73 - Tom Hammond N0SS