[Elecraft] QRPp

Fri Mar 1 00:57:00 2002

Take a look at http://www.qsl.net/la3za/K2/mod.html#K2-misc and you will
find pointers to two different ways to modify the K2 for QRPP operation.

Sverre Holm, LA3ZA
Asker, Norway (59.8N, 10.4E)
---------------------------------
www.qsl.net/la3za

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Jay Henson
Sent: 1. mars 2002 04:30
To: Elecraft List
Subject: [Elecraft] QRPp

I had so much fun in the mw contest that I ordered an OHR WM-2 watt
meter so that I could get a better feel for my output power.  That
raised several issues that I have had to deal with and resolve.

For the group - On 40 meters (because that is the band used for the CAL
P adjustment), it seems that the lowest power output I can get is about
175 mw from my K2 s/n 1073.  Is this unusual?  I do not have the 5 watt
efficiency mod/change installed but I am not sure that this will allow
the K2 to go lower in power output.

Is there a better/easier way to drop to the 50 mw level than adding an
attenuator to the output?

Thanks for any advice.

72!
Jay
AJ4AY
Mobile, AL
FP -115, SOC 220, ARCI 8131, FISTS 7917, QRP-L 1372

_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list. 
Postings must be plain text (no HTML or attachments). 
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com