[Elecraft] No ALC reading

[Dave Gingrich K9DC]

At 00:50 6/18/2002 +0200, Eduardo Jacob wrote:
>I don't get any ALC reading when pressing the PTT and speaking. I find 
>myself in a receiver, both on carrier alone and on audio, but no ALC 
>reading. I have already tried changing R14 on SSB board to 5.6 K. Any 
>ideas before tracing every voltage?

I would try a different Microphone or audio source first and/or increasing 
the Mic gain and compression. Also keep in mind what you are looking for. 
Often the correct ALC indication is just a slight flickering of the upper 
LED segment.

================================================
Dave Gingrich, K9DC - Indianapolis, Indiana  USA
K2 #2211, K1 #931, QRP-L #2376, ARS #1109,
FPQRP #389, IRLP #473, k9dc.ampr.org, CCIE #6748
================================================