[Elecraft] KPA-100 with K2 ATU

[Tim and Nancy Logan]

Now I'm getting confused again :-) With the KPA100 INSTALLED in the K2
and the KAT2 removed, my understanding is that it will tune and transmit
at QRP levels (under 5 watts) as well as the 100 watt level - both using
the same external tuner to be released in September. DO I have this
right? Thanks folks. Tim NZ7C 

Tom Hammond N�SS wrote:

> 
> If you wish to tune up under low power (e.g. with the KPA100 OUT of the
> line), merely turn the power back to a level less than 11W and the KPA100
> will drop out of the line. Also, when the KPA100 is IN-LINE, with you press
> [TUNE] the output power from the KPA100 is set to 20W for ATU tuning purposes.
> 
> Hope this helps,