[Elecraft] S-Meter Sensitivity

[Dave Johnson]

>I just checked four K2 radios I have in my lab and the CAL S HI needs to
>be reduced to around 10 to 12 to get a reading of S9 with the corrected
>setup above. This means the S-meter does read a little low on these radios
>with the manual calibration.

I've just checked my CAL S HI and it's showing 016 for S9 = 50 uV on my
Marconi signal generator. The original setting (as per the Elecraft manual)
left the S-meter rather on the mean side.

Dave, G4AON
K2 #1892