[Elecraft] Off center K2 LCD display

[Don Wilhelm]

John and all,

I too just noticed this black line after reading your e-mail, and I have SN
00020, so this condition has been present since day 1.  I believe that from
a normal viewing position (head above and in front of the K2), this
positioning of the LCD allows viewing the maximum area of the display - if
it were positioned further upward, the total view would be reduced in
height, so IMHO, this problem is in fact a good thing.

73,
Don Wilhelm  - Wake Forest, NC   W3FPR home page: http://www.qsl.net/w3fpr/
  QRP-L # 485   K2  SN 0020   mailto: w3fpr@arrl.net

*** Life is what happens when you're making other plans -- Mike Cross  ***

----- Original Message -----
> I just noticed that the LCD module is not centered in the window on my
> K2.  It looks great if I look at the LCD display from a position that
> is slightly higher than the window but if I position the radio so that
> the window is at eye level, I see a black horizontal line near the top
> of the window.  The black line is the top of the LCD module.  It looks
> as though I mounted the module a tad too low.  Would someone else take
> a look at their K2 and let me know if you see what I see?