[Elecraft] K2 S-Meter Sensitivity

Mon Jun 3 19:50:01 2002

Hi

I have a Tektronix 191 leveled RF signal generator and a HP step attenuat=
or that goes down to 100 db. I set the RF level to 0.5 Volts and the atte=
nuator to 40 db giving 50 UV. With this connected to the K2 I adjust the =
Cal S HI so the meter reads S9. This will usually come out +or- a little =
from the manual set point.

Don Brown
KD5NDB  =20

----- Original Message -----
From: [email protected]
Sent: Monday, June 03, 2002 5:49 PM
To: [email protected]
Cc: [email protected]
Subject: [Elecraft] K2 S-Meter Sensitivity

<SNIP>

Has anyone out there mearsured their K2's S-meter sensitivity using a lab
signal generator/  If so, what are the results?

73, de Earl, K6SE
66 countries on K2 #2622 and counting.....
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---