[Elecraft] T1 & T2 WINDING

Thu Jul 18 14:39:00 2002

Hi Joe,

I had similar problems, especially with T2, and asked Gary
about it. He indicated that it is not critical.

73,
Doug
W6JD
K2 #1626

----- Original Message ----- 
From: "Joe Wiedeman" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>
Sent: Wednesday, July 17, 2002 7:56 PM
Subject: [Elecraft] T1 & T2 WINDING

> Hi All:
> Question
> I can't seem to get a neat winding on T1 and T2 for the K2/100.
> The windings are twisted not stacked one above the other like
> in Figure's 25 and 27. I could just about stuff the #18 wire
> through the coil for the last loop on T2 no less try to get the windings
> to stack. Will it effect performance if the windings are intermixed ?
> They are all as snug (tight) as possible.
> Joe  K2MUF
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list. 
> Postings must be plain text (no HTML or attachments). 
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> 