[Elecraft] Sidetone mod

[dk4lx]

Thanks Tom - my mistake: overlooked "control board". Sorry about that.
161, Holger

Tom Hammond NXSS schrieb am 18.07.2002:
>Holger:
>
>>I wanted to implement the sidetone mod by WJ4P the other day, but -
>>much to my surprise - the parts/values referred to in the mod
>>description,  do not comply with what I have on my pcb. I was able
>to
>>spot the numbered caps ok, but neither were they in the audio
>>section, nor did they have the values specified in the mod. How
>come?
>>Do I have to live with my non-sinusoidal sidetone for the rest of my
>>life?
>
>What is the Rev level of the MANUAL for your K2?
>
>There should NOT have been ANY component ID changes in any of the
>manuals, 
>but I will be happy to check and try to give you the proper
>component IDs.
>
>Finally... BE SURE you are referring to the correct PC board. The
>board 
>Randy is working on is the CONTROL BOARD, not the RF Board.
>
>I just checked the component IDs on Revs D & C of the K2 manual, for
>the 
>Control Board and everything is correctly identified.
>
>73,
>
>Tom Hammond   N0SS
>
>


___________________________
Holger Matthiessen
Hosenfeld/nr Frankfurt
LOC: JO40RM
email: dk4lx@darc.de
PostMe 3.02