[Elecraft] KFL1-2 40m/20m band components, FREE (you pay post age)

Mon Jul 8 16:04:01 2002

No takers!

Doesn't ANYONE want this stuff? Don't forget, the toroids
are prewound and tested. ;-)

-Andy

> -----Original Message-----
> From: Wallace, Andy [mailto:[email protected]]
> Sent: Thursday, July 04, 2002 2:45 PM
> To: [email protected]
> Subject: [Elecraft] KFL1-2 40m/20m band components, FREE (you pay
> postage)
> 
> 
> Well I acquired a KFL1-2 as payment for building a KFL1-4
> for a List member. :-)
> 
> I already have 40/30/20/15 in my K1, so I decided to order
> the 80/17m band components from Elecraft. For those who don't
> know, it's $15/pair...ask for enameled wire if you don't have
> any left over from your K1. 
> 
> So...The 80/17 board just tuned up fine and I will offer the
> pulled components for 40/20 FREE, just reimburse me for the 
> postage, which will probably be less than $2. Note that
> these components have short leads and have been removed using
> a solder sucker; they won't be as easy to install as fresh ones.
> Also, I broke C14 (560pF) in the 40m band kit when removing it
> so you will have to provide your own.
> 
> In case there is a run on this, I WILL DRAW NAMES FROM A HAT
> on NOON MONDAY 7/8/02....lucky one will hear from me. 
> 
> Hope someone can use these to convert their board or for
> experimenting. Bet there would be a market for a KFL1-6
> with SMD components and six bands stuffed onto it. ;-)
> 
> -Andy
> [email protected]
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list. 
> Postings must be plain text (no HTML or attachments). 
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> 